Embedding Accessories
Med Vet International Draxxin KP (Tulathromycin and Ketoprofen) Injectable Solution Antibiotic and Anti-Inflammatory 500mL
VET LICENSE NEEDS TO BE PROVIDED IN 3-4 BUSINESS DAYS OR ORDER WILL BE CANCELLED
Draxxin KP (Tulathromycin and Ketoprofen) Injectable Solution Antibiotic and Anti-Inflammatory 500mL
Electron Microscopy Sciences Flat Embedding Mold 3 mm with Cocoon Box
No more stickiness with new storage boxes. Most resins are no longer a challenge to flat embed when used in combination with the Cocoon box. The system withstands temperatures up to 70 Degrees C, and our flat embedding of many resins is made easier.
Electron Microscopy Sciences Biopsy Paper Filters, White
Specifically designed for processing biopsy specimens. Non-absorbent mesh allows fluids to flow through freely while containing small tissue fragments. Non-absorbent porous mesh prevents reagent carryover. They eliminate the indentation pattern left by form biopsy pads. Can be easily opened with tweezers. Allows efficient solvent flow-through during processing.
Color: White
Electron Microscopy Sciences Adjustable Embedding Mold, 89 x146 x 25 mm
These two "L's" shape and stainless steel base plate form an adjustable embedding mold, suitable for embedding various size specimens with a minimum of waste material.
Size: 89 x 146 x 25 mm
Cayman Chemical STI7genral STI often found 1ea
Oliogonucleotide recipes are optimized for Bio-Rad CFX96 or CFX384. Includes 4 tubes: • Tube 1: 5X Primers and probes for 4 pathogens and human control • Tube 2: Synthetic positive controls • Tube 3: Spike-in RPP30 control • Tube 4: 2X qPCR enzyme mastermix Organism Type: Bacteria (no cell wall), Bacteria Gram-, Protozoan, Multiplexed Reaction Panels: STI, Vaginal microbiota Colors: Cy5 (Mycoplasma genitalium), Cy5.5 (Neisseria gonorrhoeae), FAM (Chlamydia trachomatis), HEX (RPP30), TEX615 Instruments: Bio-Rad CFX96 or CFX384 (Trichomonas vaginalis)
Electron Microscopy Sciences Flat Embedding Mold Small Flat Embedding Mold, 4 mm deep, 10 x 6 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. This mold produces 12 embedding blocks with tapered ends.
Depth: 4 mm
Size: 10 x 6 mm
Cavities: 12
Electron Microscopy Sciences Embedding Mold, Dykstra
EMS Embedding Mold is a new mold designed with Michael J. Dykstra Ph.D. from North Carolina State University Department of Veterinary Medicine. This Mold produces blocks of the best dimension to be held securely by Reichert/Leica Ultracut stepped microtome chucks. There are 24 cavities and the depth of each cavity is 4 mm which will prevent breakage of the blocks during razor blade trimming. Mold Measurements: 3 3/8" x 3" (85 x 77 mm. Cavity Measurements: 15 mmx 7 mm x 4 mm deep
Electron Microscopy Sciences Embedding Cassette Disposable Base Mold, 30 x 24 mm, 5 mm height
Clear plastic. Eliminates use of cleaning solvents and release compounds.
Footprint: 30 x 24 mm
Height: 5 mm
Electron Microscopy Sciences 25 mmx2 mm Foam Pads
A cellular polyester blue foam that has uniform air pockets throughout the pad for optimal fluid flow. It prevents either small or fragmented tissue specimens from being lost. To use simple place small samples or specimen fragments between the two pads and place the specimen in a cassette or capsule.
Electron Microscopy Sciences 35 mm Biopsy Foam Pad
A cellular polyester blue foam that has uniform air pockets throughout the pad for optimal fluid flow. It prevents either small or fragmented tissue specimens from being lost. To use simple place small samples or specimen fragments between the two pads and place the specimen in a cassette or capsule.
Electron Microscopy Sciences Slide Duplicating Mold, 3 Cavity
Uses a 1x3" glass slide as a base, and duplicates the slide using the resin of your choice. Tissue sections are embedded against the flat glass surface. This duplicated resin slide can be studied under the Light Microscope, then cut, remounted, resectioned, and studied under the EM. A three cavity mold, each cavity measuring: 1"(W)x3"(L)x3/32"(D). Reference and Instructions enclosed
